WBSLZ9C53DDZ***** VIN lookup for 2013 BMW M6 (WBSLZ9C53DDZ78059)
WBSLZ9C53DDZ78059 VIN is assigned
to 2013 BMW M6 .
It is a PASSENGER CAR .
It was manufactured by BMW M GMBH.
This 2013 M6 is a
Convertible/Cabriolet.
WBSLZ9C53DDZ77848
| Make | BMW |
| Manufacturer Name | BMW M GMBH |
| Model | M6 |
| Model Year | 2013 |
| Plant City | DINGOLFING |
| Series | 6-Series |
| Trim | Convertible |
| Vehicle Type | PASSENGER CAR |
| Plant Country | GERMANY |
| body Image Id | 1 |
| Body Class | Convertible/Cabriolet |
| Doors | 2 |
| Bed Type | Not Applicable |
| Cab Type | Not Applicable |
| Trailer Type Connection | Not Applicable |
| Trailer Body Type | Not Applicable |
| Engine Numberof Cylinders | 8 |
| Displacement(CC) | 4400.0 |
| Displacement(CI) | 268.2 |
| Displacement(L) | 4.4 |
| Engine Power(k W) | 412.3721 |
| Fuel Type- Primary | Gasoline |
| Engine Brake(hp) From | 553 |
| Pretensioner | Yes |
| Seat Belt Type | Manual |
| Curtain Air Bag Locations | 1st Row (Driver and Passenger) |
| Front Air Bag Locations | 1st Row (Driver and Passenger) |
| Knee Air Bag Locations | 1st Row (Driver and Passenger) |
| Side Air Bag Locations | 1st Row (Driver and Passenger) |
| Tire Pressure Monitoring System( T P M S) Type | Direct |
| NCSA Body Type | Convertible(excludes sun-roof,t-bar) |
| NCSA Make | BMW |
| NCSA Model | 6-series |
| Bus Floor Configuration Type | Not Applicable |
| Bus Type | Not Applicable |
| Custom Motorcycle Type | Not Applicable |
| Motorcycle Suspension Type | Not Applicable |
| Motorcycle Chassis Type | Not Applicable |
Driver Complaints
Recalls
September 28 , 2012 NHTSA Campaign Number: 12V475000
ENGINE AND ENGINE COOLING:ENGINE
Separation of the pump's driveshaft from the rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash.
Manufacturer: BMW OF NORTH AMERICA, LLC
Components: ENGINE AND ENGINE COOLING
Potential Number of Units Affected: 696
Description:
BMW is recalling certain model year 2013 M5, M6 Coupe, and M6 Convertible vehicles, manufactured from July 19, 2012, through September 11, 2012. Due to a manufacturing process error, the tolerance between the engine oil pump's drive shaft and the pump's rotor was not within specification. As a result, the pump's driveshaft could separate from the rotor.
Remedy:
BMW will notify owners, and dealers will replace the oil pump, free of charge. The safety recall began on November 30, 2012. Owners may contact BMW at 1-800-525-7417.
Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
August 08 , 2017 NHTSA Campaign Number: 17V495000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
Manufacturer: BMW of North America, LLC
Components: AIR BAGS
Potential Number of Units Affected: 6,785
Description:
BMW of North America, LLC. (BMW) is recalling certain 2012-2013 BMW X3 xDrive28i, X3 xDrive35i, and M6 Convertible vehicles and 2013 M6 Coupe vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been improperly welded.
Remedy:
BMW will notify owners, and dealers will replace the driver's front air bag module, free of charge. The recall began October 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Rating:
4.71 from 5
(4291 reviews)