5UXFA53532LV***** VIN lookup for 2002 BMW X5 (5UXFA53532LV71610)
5UXFA53532LV71610 VIN is assigned
to 2002 BMW X5 .
It is a MULTIPURPOSE PASSENGER VEHICLE (MPV) .
It was manufactured by BMW MANUFACTURER CORPORATION / BMW NORTH AMERICA.
This 2002 X5 is a
Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV).
5uxfa53532lv70084
5UXFA53532LV73082
| Make | BMW |
| Manufacturer Name | BMW MANUFACTURER CORPORATION / BMW NORTH AMERICA |
| Model | X5 |
| Model Year | 2002 |
| Plant City | GREER |
| Trim | 3.0i |
| Vehicle Type | MULTIPURPOSE PASSENGER VEHICLE (MPV) |
| Plant Country | UNITED STATES (USA) |
| Plant State | SOUTH CAROLINA |
| body Image Id | 7 |
| Body Class | Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV) |
| Doors | 4 |
| Gross Vehicle Weight Rating From | Class 2E: 6,001 - 7,000 lb (2,722 - 3,175 kg) |
| Trailer Type Connection | Not Applicable |
| Trailer Body Type | Not Applicable |
| Engine Numberof Cylinders | 6 |
| Displacement(CC) | 3000 |
| Displacement(CI) | 181.8 |
| Displacement(L) | 3 |
| Engine Power(k W) | 167.7825 |
| Fuel Type- Primary | Gasoline |
| Engine Brake(hp) From | 225 |
| Engine Manufacturer | BMW Manufacturing Corp. |
| NCSA Body Type | Compact Utility (Utility Vehicle Categories "Small" and "Midsize") |
| NCSA Make | BMW |
| NCSA Model | X5 (For 2000-16. For 2017 on, see model 421). |
| Bus Floor Configuration Type | Not Applicable |
| Bus Type | Not Applicable |
| Custom Motorcycle Type | Not Applicable |
| Motorcycle Suspension Type | Not Applicable |
| Motorcycle Chassis Type | Not Applicable |
Driver Complaints
Recalls
February 04 , 2003 NHTSA Campaign Number: 03V032000
SEAT BELTS:FRONT:BUCKLE ASSEMBLY
IF THE CONNECTION DETACHES, THE PROTECTION PROVIDED BY THE SAFETY BELT IS LIKELY TO BE IMPAIRED, AND SERIOUS INJURIES TO THE DRIVER AND/OR FRONT PASSENGER COULD OCCUR THAT MIGHT OTHERWISE BE MITIGATED.
Manufacturer: BAYERISCHE MOTOREN WERKE
Components: SEAT BELTS
Potential Number of Units Affected: 2,635
Description:
ON CERTAIN PASSENGER VEHICLES, THE CONNECTION OF THE SAFETY BELT BUCKLE TO THE STEEL ROPE OF THE TENSIONER DOES NOT MEET BMW SPECIFICATIONS. IN SEVERE FRONTAL CRASHES, THIS CONNECTION CAN DETACH.
Remedy:
DEALERS WILL INSPECT BOTH FRONT SAFETY BELT TENSIONER AND BUCKLE ASSEMBLIES, AND IF NECESSARY, REPLACE THESE PARTS. OWNER NOTIFICATION BEGAN MARCH 19, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
Notes:
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
January 09 , 2003 NHTSA Campaign Number: 03V001000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
THIS COULD INITIALLY CAUSE SOME BRAKE FLUID LEAKAGE, AND EVENTUALLY LEAD TO A SUBSTANTIAL LOSS OF BRAKE FLUID. THERE COULD BE A NOTICEABLE REDUCTION IN BRAKE PERFORMANCE IF A LOSS OF FRONT BRAKE PERFORMANCE OCCURS.
Manufacturer: BAYERISCHE MOTOREN WERKE
Components: SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected: 84,000
Description:
ON CERTAIN SPORT UTILITY VEHICLES, IT MAY BE POSSIBLE FOR THE FRONT BRAKE LINE TO SLIP OUT OF THE RETAINING BRACKET LOCATED AT THE FRONT STRUT. THE BRAKE HOSE THAT IS ATTACHED TO THE BRAKE LINE COULD COME IN CONTACT WITH THE TIRE AND BE SUBJECTED TO WEAR AND ABRASION.
Remedy:
DEALERS WILL INSTALL AN ADDITIONAL RETAINING CLIP TO FURTHER SECURE THE BRAKE LINE TO THE FRONT STRUT. ADDITIONALLY, IF INSPECTION OF ANY BRAKE HOSE INDICATES THAT IT HAS EXPERIENCED DAMAGE, THE HOSE WILL BE REPLACED. OWNER NOTIFICATION BEGAN FEBRUARY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
Notes:
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
January 20 , 2017 NHTSA Campaign Number: 17V047000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Manufacturer: BMW of North America, LLC
Components: AIR BAGS
Potential Number of Units Affected: 230,117
Description:
BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Remedy:
BMW will notify owners, and dealers will inspect the driver side air bag module, replacing it as necessary, free of charge. The recall began March 15, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Rating:
4.71 from 5
(4291 reviews)